Skip to main content
Dryad

Strain localization in sandstone-derived fault gouges under conditions relevant to earthquake nucleation

Data files

Aug 03, 2023 version files 9.87 GB

Abstract

Constraining strain localization and the growth of shear fabrics within brittle fault zones at sub-seismic slip rates are important for understanding fault strength and frictional stability. We conducted direct shear experiments on simulated sandstone-derived fault gouges at an effective normal stress of 40 MPa, pore fluid pressure of 15 MPa, and temperature of 100°C. Using a passive strain marker and X-ray Computed Tomography (XCT), we analyzed the spatial deformation of the gouge samples obtained from the strain-hardening stage to strain-softening stage to steady-state at shearing velocities of 1, 30, and 1000 µm/s. We developed a machine-learning-based automatic boundary detection method to recognize the shear zone fabrics and quantify the slip partitioning between each fabric element. Our results show that R1 and Y (or boundary) shears are the two major shear zone fabrics. At velocities of 1 and 30 µm/s, the relative amount of slip on R1 shears is displacement dependent and increases to ~20% at the strain-softening stage and then decreases to ~10–18% at steady-state. This trend is absent at high velocity with an amount of ~18% through all investigated stages. At all velocities, the relative amount of slip on Y and boundary shears increases linearly with displacement to a total of more than 50% at steady-state. Our study provides constraints for the development of the active slip zone, which is an important input parameter for the heat budget for small-magnitude earthquakes with limited slip (mm-dm), such as those occurring in induced seismicity.